Meet Your Tabletop Table!

Thank you for choosing the Tabletop Table - the premium, portable gaming table designed for epic adventures. Whether you have the lightweight Hexlite or the premium Relic model, your table is ready to enhance your gaming experience in under 60 seconds.

Assembly & Care

Meet Your Tabletop Table! 

  • STEP N°. 1: Prepare Your Space

    • Clear any debris from your surface to avoid damaging the table finish.
    • Assemble on a clean, flat surface.
    • Assemble on top of the carrying bag to protect against scratches

  • STEP N°. 2: Open Table & Remove Components

    • Unfold the table so that the top lays flat against the support surface. 
    • Take out the legs and accessories and set them aside

  • STEP N°. 3: Assemble Base

    • Interlock the legs together to form the base.
    • Attach the interlocked base to the underside of the table, metal rails facing down. The magnets will guide and secure the base into position.

  • STEP N°. 4: Flip the Table

    • Once legs are securely attached, lift the table from the long sides, opposite the hinges, and flip table over.
    • Avoid lifting from the hinge sides, as this may cause the legs to detach during the flip

  • STEP N°. 5: Attach Accessories

    • Attach the accessories. They should snap securely into place.
    • Your Tabletop Table is now ready for play!

Maintenance & Care

  • Cleaning

    Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or standing water. For Relic model, use wood polish sparingly to maintain finish.

  • Periodic Inspection

    Before each use, check for loose parts, cracks, or wear on hinges, legs, and magnetic areas. Check magnetic connection before each use.

  • Storage

    Store legs in inner cavity, and place in the travel bag in a cool, dry place. Avoid stacking heavy items on top.

  • Longevity Tips

    Rotate accessory placements to prevent wear. For Extender, store separately if not in use.
See Safety Instructions

Extender Accessories Assembly Instructions

Meet Your Tabletop Table Extender! 

  • STEP N°. 1:  Prepare Your Table

    • Clear any debris from your surface to avoid damaging the Table or Extender finish.
    • Rotate the Table so that the center seam runs side-to-side. It is important that the Extender seam and the Table seam do not align, and are perpendicular to each other, creating a more stable connection.

  • STEP N°. 2: Attach Extender

    • Remove your Extender panels from their protective carrying bag.
    • Hold the first Extender at an upward angle and place the overhang ledge so that it meets the edge of your Tabletop Table first.

  • STEP N°. 3: Secure Extender

    • Once the Extender ledge is in place against the outside edge of the Table, swing the top down to secure the magnetic attachment at the center.

  • STEP N°. 4: Attach the Other Side

    • Repeat the previous two steps for the other side of the Table Extender.

  • STEP N°. 5: Adjust the Fit

    • Make sure the Extender panels are stable and secure, sliding them inward to meet at the center seam, if needed.
    • Your Extended Table is now ready for play!

  • STEP N°. 6: Remove Extenders

    • To remove the Extenders, simply lift up at the outside edge to release magnets, and then lift away. Store Extenders in their protective bag.